TO CLEAR MAINTENANCE PROMPTS FROM TROTTER 645 TREADMILL

1- The treadmill must be in the idle mode. (Trotter banner scrolling across screen.)
2- Press and hold the Scan/Save button and without releasing it, press the (minus) – button. You will see the message “Diagnostic Tests”.
3- Press the “up arrow” button until the display reads “C12 error log”.
4- Press the Enter button.
5- Press the Scan/Save button.
6- Press the Stop button to exit the diagnostic mode. This will clear the current maintenance prompt.
7- You will need to do this same procedure for each of the 1 thru 5 maintenance prompts if needed.

MESSAGE CODES

M1: Clean treadmill – This message appears every 500 miles.
M2: Check current draw – This message appears every 1000 miles.
M3: Check motor brushes – This message appears every 2000 miles.
M4: Check deck/belt wear – This message appears every 2500 miles.
M5: Lubricate elevation – This message appears every 5000 miles.

M3, M4, M5 - Should all be performed by a qualified service technician.  Contact us to schedule a service call today.