All Pro Exercise's Service Department has a strong committment to our client base to offer preventative maintenance programs to "head off" potential problems that will occur as your gym equipment ages. Dry treadmill decks, dirty rusty chains, and worn parts will inevitably lead to "down time" and money out of pocket. Don't wait until it's too late. Have an All-Pro Exercise service technician perform preventative maintenance on your fitness equipment today!

The Service Department currently offers a 20 point and 6 point preventative maintenance program for your cardio equipment along with a strength equipment check-up.

Prices excludes service call, parts or additional labor charges for equipment repair.  Hourly labor rates for repairs are $70.

20 Point Detailed Preventative Maintenance Program

$35 Per Cardio Piece includes the following: Remove Covers, Clean and Vacuum Out Interiors Remove Dirt and Debris From Motor Vents And Circuit Boards Inspect Wire Harnesses And Connections Lube All Chains, Bearings, Bushings, Rollers, Pulleys And Pivots Sand Build Up From Flywheels (where applicable) Sand Motor Comutators (where applicable) Check Condition of Motor And Alternator Brushes Check Condition And Alignment Of All Drive Belts, Chains And Cables Inspect Condition Of All Bearings And Bushings

Replace Parts Where Necessary Inspect All Other Parts For Wear And Function Tighten Loose Crank Arms, Belts And Pulleys Check Calibration of Speed And Elevation Sensors, Recalibrate If Necessary Lubricate Treadmill Decks (where applicable) Grease Drive Assemblies And Elevation Assemblies Check Machine Functions And Operation Clean Exteriors Log Mileage, Hours, Floors, Feet and Strides, Error Log. (where available) Keep track of all service done on our service computer. Information available at any time. Complete detailed service report of current condition and possible future problems.

6 Point Preventative Maintenance Program

$25 Per Cardio Piece includes the following: Remove Covers, Clean and Vacuum Out Interiors Remove Dirt and Debris From Motor Vents And Circuit Boards Lube All Chains, Bearings, Bushings, Rollers, Pulleys And Pivots

Visual Inspection of All Moving Parts Clean Exteriors Check Machine Function and Operation

$10 per Strength Machine includes the following:

• Clean and lube all guide rods, pivot points, pop pin adjusters, bearings and bushings
• Inspect all cables, chains, belts, nuts, and bolts
• Check machine for proper function and movement.
• Adjust if needed.